THE DUST BLASTERS
The Toughest Jobs Don't Stand A Chance
Dustless Blasting is what you need
Dustless Blasting
Dustless Blasting is a revolutionary paint stripping and cleaning system that can remove virtually any coating from any surface. ... Blast More Efficiently - Dustless Blasters are designed to combine water and abrasive so that you can clean and strip your surfaces while consuming less media per job. Abrasive blasting uses various materials to strip imperfections, paint, rust and other contaminants from a surface. It's an important step in surface coating preparation, as it cleans a substrate and creates a surface that will hold a protective coating.
Media Blasting
Media blasting is a process that uses pressurized air to shoot pieces of an abrasive material out of a nozzle. The force of the blasting media can strip paint, rust, or other blemishes from the target. Think of it as pressure washing with small particles instead of (or in addition to) water. Media blasting can strip paint without damaging the base material, even if it's plastic and wood, and smooth out pitting on the hardest of metals. The technique's utility extends to other home projects, including stripping old bike frames and metal lawn furniture, and even removing calcium deposits from tiles.
FAQ's
Will it warp metal?
The Dustless Blaster will NOT cause warping, because friction and heat are reduced by the water. Warping occurs when the metal heats up due to friction from dry abrasive. In fact, the temperature of the metal being blasted usually comes down about 10º from ambient.
Think of it this way - if you rub your hands together, they get warm due to friction. But if you rub your hands together underneath running water, they stay cool. The water eliminates the friction. No friction = no heat = no warping!
Why doesn't it flash rust?
By using a specially formulated rust inhibitor, you can prevent flash rust for up to 72 hours. Add the inhibitor to the blast water to prevent flash rust during blasting, and then use it as a rinse after blasting is complete.
What kind of abrasive is used?
For wet blasting, you can use any abrasive as long as it is clean, consistent, and sinks in water. The most inexpensive and popular choice of media is 40/70 recycled bottle glass. Other abrasives used are Crushed Glass, Copper Slag / Coal Slag, Sand, Garnet, Organics (Walnut, Corncob, Soda, etc.)
FAQ's
What services do you offer?
These are just a few of the services we offer:
Automotive Restoration
Graffiti Removal
Heavy Equipment Cleaning
Powder Coating Removal
Marine Maintenance
Concrete Cleaning
Wood Restoration
Etching
Stripe
Curb Paint Removal
What is Dustless Blasting?
Dustless Blasting is a revolutionary paint stripping and cleaning system that can remove virtually any coating from almost any surface, without creating a huge plume of dust.
The Dustless Blaster works by mixing water and abrasive inside the blast tank. By introducing water, we’re drastically increasing mass and energy the machine is putting out, while suppressing dust.
Is it Environmentally Safe?
Since the debris is captured with the water during the blasting process, Dustless Blasting can be easily contained and cleaned. We comply with EPA and DEQ regulations.
Because there is no dust plume or toxic chemicals, it can be used in areas with strict environmental rules and regulations.
Produces very little runoff that is simple to contain.
Gallery
Our latest and best photos
We love to take pictures and show them to the world.
